Home › Data › Stamping die cost
Collected October 2026 · Published 21 Oct 2026 · Written by the Shanghai Bridge team
What we did, and what we did not do
We collected six statements about what stamping tooling costs in China. Five are published price guides: two tool shops that maintain English-language engineering blogs with price tables, a die maker's buyer guide, a sourcing guide site, and a tool shop's marketplace listing. The sixth is our own enquiry, made in October 2026, to a tool shop in Guangde, the Anhui cluster where most of the Yangtze delta's die shops have moved.
Every published figure is reproduced here as the shop wrote it. Where a shop stated how many stations a die has, we divided the price by the station count — the one conversion that makes different shops' numbers comparable, and the reason becomes the second finding.
We did not send a drawing. We did not ask any shop to price a real part. Every number here is what a shop says tooling costs before it has seen yours, which is exactly the kind of number a buyer sees first.
Finding 1: the same die category, a thirty-fold spread
Here are the six statements, with the category each one claims to describe. The Guangde line is ours; the rest are the shops' own published guides, quoted as written.
| Source | Die as described | Stations stated? | Price as published |
|---|---|---|---|
| Ningbo-area tool shop, price guide | Simple progressive | 3–5 | $4,000–12,000 |
| Dongguan source factory, engineering blog | 3–8 station progressive | 3–8 | $3,000–12,000 |
| Sourcing guide site, 2026 edition | Progressive tooling | no | $2,000–15,000 |
| Marketplace listing, Qingdao shop | Progressive die, complete set | no | $5,000–30,000 |
| Our enquiry, Guangde cluster | Progressive dies (range quoted to us) | no | $8,000–30,000 |
| Hebei die maker, buyer guide | Simple progressive | no | $25,000–60,000 |
The same nominal object — a simple or entry-level progressive die — quotes anywhere from $2,000 to $60,000. That is thirty times, inside one category label.
The Guangde quote sits in the lower middle of the band, which is what we expected: the cluster's whole pitch is delta-trained toolmakers on inland costs. But the more useful reading is that the Guangde number is not an outlier at all. It overlaps four of the five published ranges. What looks like disagreement between shops is mostly the label failing to carry information.
Finding 2: only two of six say how many stations
A die is priced by what is inside it: each station adds punches, inserts, a strip progression step, and the machining that goes with them. So the only fair unit of comparison is cost per station. Two of our six sources state station counts, which lets us do the division:
| Source and die type | Stations | Price | Cost per station |
|---|---|---|---|
| Ningbo shop, simple progressive | 3–5 | $4,000–12,000 | $800–4,000 |
| Ningbo shop, medium progressive | 6–12 | $12,000–35,000 | $1,000–5,833 |
| Ningbo shop, complex progressive | 13–20 | $35,000–80,000 | $1,750–6,154 |
| Dongguan factory, progressive | 3–8 | $3,000–12,000 | $375–4,000 |
Normalized this way, the spread collapses from thirty-fold to about sixteen-fold: one station costs a shop $375 to $6,154 to build. The remaining spread is real — it is die steel grade, strip thickness, tolerance and how much of the work is wire-cut versus turned — but it is a spread about engineering, not about markup.
Note what the four sources without station counts have in common: their ranges are the widest. The Qingdao listing spans $5,000–30,000 and the Hebei guide's “simple progressive” starts where the Ningbo shop's “complex” ends. A price guide that omits stations is not a price list; it is a floor and a ceiling with everything in between attributed to nobody's part.
Finding 3: the cheap die is expensive per piece
A single-stage (single-hit) die costs a fraction of a progressive die — the published range runs from $800 to $12,000 depending on who is writing — and the shop quoting it will sound like the reasonable one. The catch shows up in the piece price. The same Hebei guide that prices single-stage tooling also states the penalty: single-stage production adds $0.50 to $1.50 per piece in handling between operations, because a single-hit die does one operation per stroke and somebody has to move the part.
That turns the tooling decision into arithmetic:
| Tooling price difference | Handling saving per piece | Break-even quantity |
|---|---|---|
| $6,000 — an $8,000 progressive vs a $2,000 single-stage | $0.50–1.50 | 4,000–12,000 pcs |
| $13,000 — a $15,000 progressive vs a $2,000 single-stage | $0.50–1.50 | 8,700–26,000 pcs |
| $28,000 — a $30,000 progressive vs a $2,000 single-stage | $0.50–1.50 | 18,700–56,000 pcs |
The die pays for itself somewhere between 4,000 and 56,000 pieces, depending on which tier of tooling you buy. Below that quantity, the single-stage die is genuinely cheaper. Above it, every piece carries the handling penalty for nothing. This is why a shop that pushes progressive tooling for a 3,000-piece part is selling its preference, and why a shop that sells you a single-stage die for a part you will run for years is not doing you a favour either.
The same arithmetic works in reverse for the die you do buy. A $40,000 progressive die producing 10,000 pieces a year charges $4.00 per piece in tooling alone — more than the handling penalty it was purchased to avoid. At 100,000 pieces the same die charges $0.40. The tooling line on a quotation is only meaningful once it is divided by the quantity you actually intend to run.
Finding 4: where the money sits inside the quote
Two shops quoting the same part $8,000 apart are usually not arguing about margin. The published guides name where the difference lives:
| Line inside the quote | What the guides say | Why it moves the price |
|---|---|---|
| Design and strip layout | 15–25% of tooling cost; a poor layout wastes 28–35% of the coil | Design decides station count, piloting and bend sequence; a weak layout cannot be fixed later by better machining. On expensive strip, wasted coil is money every stroke. |
| Die steel grade | Cr12MoV/D2 baseline; SKD11 or DC53 adds 20–30% to steel cost for 40–60% longer insert life | A long-life programme justifies the better steel; a short run does not. The grade is the cheapest thing to quietly upgrade — or quietly omit. |
| Strip thickness and material | The same 10-station die for 0.3 mm copper strip runs 35–45% cheaper than for 2.5 mm structural steel | Thicker, harder strip needs bigger presses, tougher inserts and more force per station. |
| Tryout and revision rounds | Quoted “including tryout” by some, silent by others | The item most easily deleted from a competitive quote and re-invoiced later, one revision at a time. |
The practical use of this table is to compare two quotes on identical scope before comparing prices: same station count, same steel grade, same strip assumptions, same number of tryout rounds in writing. Once those four lines match, the price gap usually shrinks to a rational number.
Finding 5: the material changes the die, not just the part price
The Guangde shop we approached runs three strip materials: carbon steel, stainless steel, and beryllium copper. Each one changes the tooling conversation, not only the material line on the piece price:
- Carbon steel (SPCC/DC01 class). The baseline everything else is measured against. The die's steel grade and the strip layout dominate the price; the strip itself is cheap enough that waste stings less than it should.
- Stainless steel (SUS301/304 class). Work-hardens under the punch. It needs more press force, wears inserts faster, and its springback has to be compensated with extra stations or an extra operation. The die costs more, the die life is shorter, and both facts should appear in the quote rather than in year two's maintenance invoice.
- Beryllium copper (C17200 class). Used for terminals, contact springs and EMI parts. The strip can cost ten to twenty times carbon steel per kilo, so strip layout efficiency is where the money is won or lost — the 28–35% coil waste a poor layout produces becomes a material cost, not a rounding error. Scrap has real resale value and should be weighed back to you. Formed parts need stress relief after stamping, and the shop needs genuine beryllium dust controls — worth seeing, not just asking about.
A buyer who changes material mid-project should expect the die conversation to reopen. The tooling quoted for steel is not the tooling required for stainless, and pretending otherwise is how a fixed price quietly becomes a flexible one.
What to ask instead: five questions that produce checkable answers
| Question | Why it works |
|---|---|
| How many stations, and what strip width? | Converts the category label into geometry. Two of six published guides state it; your quote should. |
| What die steel, and what die life in strokes are you quoting to? | Separates the $8,000 die from the $30,000 one, and makes die life a written number instead of a hope. |
| Does the price include tryout, first article, and how many revision rounds? | The item most often quietly cut from a competitive quote and re-invoiced later. |
| What is the piece price at 10,000 / 50,000 / 200,000 pieces? | Reveals whether tooling is amortized into the piece price — and whether the quantity assumptions behind it are yours. |
| Who owns the die, and do maintenance logs travel with it? | If the contract is silent, the shop owns your tooling. Ownership, storage and removal rights belong in writing before the deposit. |
On the last question, tooling money is the least reversible money in manufacturing. Deposits should track milestones — design sign-off, steel cut, first tryout — never precede them (the staged-payment rule).
Limitations, stated plainly
- Six sources is a convenience sample, not a survey. All five published guides come from shops that market to overseas buyers in English, which selects for export-facing shops with something to advertise. Shops that only quote against drawings publish nothing.
- Our Guangde figure is one enquiry, oral, without a drawing. The shop quoted ranges it works in, not a priced part. It anchors the band; it does not test it.
- The published guides date from 2024–2026 and were collected in October 2026. Die steel prices move, and none of the guides states its own revision date.
- Lead times are the shops' own claims — anywhere from “15–30 working days” to “8–12 weeks” for dies of similar complexity, a spread that mirrors the price spread and deserves the same suspicion.
- We kept shop names out on purpose. The method works on any quote in front of you, including the one you are holding.
Common questions
Is a US$30,000 die better than a US$8,000 one?
Not answerable from the price alone. The difference usually buys more stations, a better die steel, or a thicker strip — but it can also buy nothing. Ask for the station count, the steel grade, the strip thickness and the die life in strokes, and the two quotes become comparable line by line. Until then, the thirty-fold spread in this page is exactly what a buyer without those four numbers is looking at.
How many pieces before a progressive die pays off?
Between 4,000 and 56,000, using published figures: the progressive die costs $3,000–30,000 more than a single-stage die, and single-stage production adds $0.50–1.50 per piece in handling. Divide the tooling difference by the per-piece saving. If your annual quantity is below the break-even band, the single-stage die is the honest recommendation.
Why do you not name the shops?
Every figure here comes from a price guide the shop published itself, so the method matters more than the league table. Naming suppliers in a comparison page turns a measurement into a fight, and you can rebuild the same table for any shop quoting your part.
What does beryllium copper change in a stamping quote?
The strip material, not the die, becomes the main cost. Beryllium copper strip can cost ten to twenty times carbon steel per kilo, so a layout that wastes a third of the coil wastes real money. Scrap should be weighed back, formed parts need stress relief, and the shop needs beryllium dust controls you can see.
Where this fits
This is the second page in our data series. The first, China PVC sheet factory capacity, applied the same treatment to capacity claims: published figures, one conversion, and a check of whether they agree. Here the conversion is cost per station; there it was the implied line speed.
If you are costing a stamped part, the Guangde stamping cluster guide covers how the delta's die shops ended up an hour inland and what to vet before commissioning tooling, and the auto-parts overview shows the part families the cluster ships. The factory audit checklist covers what to look at once you are standing on the floor.
If you would rather we put the five questions above to a shop on your behalf — and sit in on the die-design review where the answers get tested — that is part of a sourcing mandate or a single paid visit.