Home › Data › PVC sheet factory capacity
Collected August 2026 · Published 21 Oct 2026 · Written by the Shanghai Bridge team
What we did, and what we did not do
We looked for Chinese plants making PVC sheet flooring that publish both a site footprint and an output figure. Eight plants qualified. We recorded every version we found, which came to twelve separate capacity statements because some plants answer the same question in more than one place.
Every figure comes from a public page: a manufacturer storefront on a B2B marketplace, a Chinese B2B directory entry, or an industry ranking page repeating the manufacturer. None came from a paid database, an audit report, or a plant visit.
Where a plant published a day rate, we used it as written. Where it published an annual output, we divided by 300 operating days. That 300 is our assumption, and we state it plainly because almost no plant states theirs. This matters more than it sounds, and we come back to it in the fourth finding.
We have not visited any of these plants. This page is not an audit of their output. It is a test of whether the numbers they publish can be checked against each other, and against physics.
Finding 1: twelve figures, a twenty-fold spread
Converted to square metres per day, the twelve statements arrange like this. The median is 20,000 square metres a day. The lowest is 3,333, the highest 66,667.
| Implied day rate | Statements in this band |
|---|---|
| Under 5,000 m²/day | 1 |
| 5,000 – 9,999 | 2 |
| 10,000 – 19,999 | 2 |
| 20,000 – 29,999 | 5 |
| 30,000 – 49,999 | 1 |
| 50,000 and above | 1 |
The spread is 20 times from bottom to top. A buyer reading one quote has no way to know where in that range the supplier actually sits, because the number means something different depending on how many lines the plant runs, how many shifts, and whether the figure counts finished roll goods or green sheet before coating.
Finding 2: one plant, five published answers
One plant in the sample appears in five places, and the five do not agree with each other. This is the same company, describing the same factory.
| Source type | Footprint as published | Output as published | Implied day rate |
|---|---|---|---|
| English storefront, listing A | 80,000 m² across two sites | 20,000 m²/day | 20,000 |
| English storefront, listing B | 45,000 m² site, 32,000 m² building | 20,000 m²/day | 20,000 |
| Chinese B2B directory | 15,000 m² | 2.0 million m²/year | 6,667 |
| Industry ranking page | 20,000 m² | 8.0 million m²/year | 26,667 |
| Chinese listing directory | 30,000 m² | 5.0 million m²/year | 16,667 |
The footprint varies by a factor of 5.3. The day rate varies by a factor of 4.0. One listing says the site is 80,000 square metres across two plants; another says 15,000 square metres. Both are describing the same company in the same year.
We are not accusing anyone of lying. It is more mundane and more useful than that: one listing counts both factories, another counts one workshop, a third may be an old page that was never updated. The point is that a buyer cannot tell which one they are reading.
Finding 3: the same footprint produces eight times more, or eight times less
Footprint is the number buyers trust most, because it is easy to imagine. It turns out to be the least informative. Four statements in the sample describe a site of roughly 15,000 to 20,000 square metres:
| Published footprint | Implied day rate | Output per m² of site per day |
|---|---|---|
| 15,000 m² | 6,667 m² | 0.44 |
| 20,000 m² | 3,333 m² | 0.17 |
| 20,000 m² | 6,667 m² | 0.33 |
| 20,000 m² | 26,667 m² | 1.33 |
Three plants of the same size produce 3,333, 6,667 and 26,667 square metres a day. Across the whole sample, output per square metre of site runs from 0.17 to 1.33, a factor of eight.
A useful sanity check follows: a PVC sheet plant cannot produce an unlimited amount per square metre of land, because the material has to be mixed, calendered, cooled, coated and stored before it ships. If two plants of identical size differ by eight times, at least one of them is not counting the same things. Either the footprint includes warehouses and offices, or the output is a peak-line figure rather than an average, or both.
Finding 4: nobody says how many days a year
Here is the quietest problem in the whole exercise. An annual output figure only becomes comparable once you divide it by the number of operating days, and almost no plant states that number.
The industry range runs from about 250 days for plants that stop for holidays and maintenance, to 365 for plants that run continuously. Divide the same annual figure by 250 instead of 365 and the day rate moves by 46%. A plant publishing 6 million square metres a year is claiming either 16,400 or 24,000 square metres a day, depending on an assumption nobody printed.
We used 300 days for every plant in this page, precisely so the comparison is at least internally consistent. That is a method choice, not a fact about any factory.
Finding 5: the cross-check that works, line speed
There is one way to test a capacity claim that does not depend on trusting anybody: convert it back into the physical quantity a plant actually controls, which is how fast the material leaves the calender.
For a roll width of 2 metres running 1,440 minutes a day, the arithmetic is:
implied line speed (m/min) = day rate (m²) ÷ roll width (m) ÷ 1,440
| Claimed day rate | Implied line speed at 2 m width | What it implies |
|---|---|---|
| 3,333 m² | 1.2 m/min | Well under one commercial line running a full day |
| 6,667 m² | 2.3 m/min | One line, partial utilisation or one shift |
| 10,000 m² | 3.5 m/min | One line, comfortable |
| 20,000 m² | 6.9 m/min | One line, well loaded |
| 26,667 m² | 9.3 m/min | One line at high speed, or two lines |
| 40,000 m² | 13.9 m/min | Two lines |
| 66,667 m² | 23.1 m/min | At least two lines running flat out, all year |
Homogeneous sheet calendering lines commonly operate in single digits to low double digits in metres per minute, and the higher the speed the more the cooling and coating stages become the constraint. So none of these figures is physically impossible. What the table shows is how much plant each claim requires: a 66,667 square metre day rate is not a slightly bigger version of a 6,667 one, it is ten times the machinery.
That is the question worth asking. Not "how much can you make", but "how many lines do you run, at what speed".
What to ask instead: five questions that produce checkable answers
| Question | Why it works |
|---|---|
| How many calendering lines do you run, and at what line speed in metres per minute? | Converts a marketing figure into a physical quantity that has an upper bound |
| How many operating days is your annual output divided by? | Removes the 46% swing between a 250-day and a 365-day claim |
| Does your footprint include raw-material and finished-goods warehouses? | Explains most of the eight-fold gap in output per square metre |
| Is the quoted lead time from your own capacity, or does it assume outsourced processing? | A plant selling more than it can make is a schedule risk, not a capacity claim |
| Can you show monthly container counts for the last three months? | The one figure that ties back to bills of lading and sailing dates |
The number that is hardest to inflate
If you only get one answer, get the container count. A 2 metre wide roll of homogeneous sheet is commonly supplied at 20 metres, so one roll is about 40 square metres, and a 40 ft container holds a countable number of them. A monthly container count therefore converts into an output figure that can be compared against the capacity claim, and the containers themselves show up on bills of lading and sailing schedules.
A day rate ties back to nothing. A container count ties back to a shipping record. That is the difference between a number you can check and a number you can only believe.
Limitations, stated plainly
- Eight plants is a convenience sample, not a survey. We picked plants that publish both a footprint and an output figure, which biases the sample towards plants that market in English and Chinese directories.
- The 300-day divisor is ours. Another divisor would move every derived figure on this page, though it would move all of them in the same direction, so the spread within the sample would survive.
- Collection was August 2026. Directory pages are rarely updated and we did not chase each plant for confirmation.
- We kept company names out on purpose. The point is the method, and the method works on any supplier you are considering, including the ones already on your shortlist.
Common questions
Are these capacity figures accurate?
We do not know, and that is the finding. Every figure here was published by the plant itself or by a directory repeating the plant, and none came with a measurement method. What we can say is that the figures cannot all describe the same kind of thing, because the highest day rate in the sample is 20 times the lowest and one plant answers its own question five different ways.
Why do you not name the plants?
Two reasons. Naming suppliers in a comparison page turns a measurement into a fight, and we would rather the method stay usable. The other is that every number here is reproduced from a public page, so you can rebuild the same table for the suppliers you are actually talking to. The method is the product, not the league table.
Does a low day rate mean a worse factory?
No. A low figure usually means one line, a single shift, or a narrow product mix rather than a bad plant. A 3,000 square metre day rate is entirely normal for a small single-line operation making short runs. The problem is not small numbers, it is a plant whose capacity claim cannot be reconciled with its own footprint and its own lead time.
What is the one number hardest to inflate?
Monthly container count. A 2 metre wide roll of homogeneous sheet is commonly supplied at 20 metres, so one roll is about 40 square metres, and a container holds a countable number of them. Container counts tie back to bills of lading and sailing dates, which a buyer can ask to see. Day rates tie back to nothing.
Where this fits
This page opened our data series: things we measured ourselves, with the method shown, so the arithmetic can be repeated rather than trusted. The second applies the same treatment to tooling: six die price guides, one thirty-fold spread. If you are comparing PVC sheet suppliers, the Henglin flooring cluster guide covers what the industry cluster actually contains, and the factory audit checklist covers what to look at once you are standing on the floor.
If you would rather we run the five questions above against a supplier you are already talking to, that is part of a sourcing mandate or a single paid visit.